DESCRIPTION:
Wrinkling and deformation
are often caused by tooling selection,
machine settings, and stability.
Controlling these factors
is key to achieving consistent bending quality.
OSM focuses on stable and reliable bending solutions.

VIDEO SCRIPT:
Wrinkles or deformation during bending?
Many people blame the material first.
But usually,
there’s more to it.
Three common reasons.
First, wrong V-opening.
If it’s too small,
the material may wrinkle under pressure.
Second, improper clamping force.
Too loose or too tight affects the result.
Third, incorrect parameters.
Angle, compensation, and speed all play a role.
And one more key factor:
machine stability.
Without stability,
consistent results are hard to achieve.
OSM press brakes
help keep every bend under control.